This is the most wanted article in a collection that focuses on teaching you fundamental strategies to fire a compound bow properly. Now, if you intend to bring attention to your goal or take an ideal position, you should be relaxed. 

So we’re now going to get dragged forward with your body – your stance – including How to Hold a Compound Bow simply and how it will add your arrow to your bowstring, comprised of two bow contact points: the hook-and-grip. It is very simple, so no need to worry at all!

How to Hold a Compound Bow Easily and Effectively: 

A lot of beginners begin with a blank mind and fail when they get into the task initially. So, it is mandatory to have a proper knowledge on this field. It will save both your time and energy. 

Let’s have a look at the steps, tips and tricks mentioned below to get the answer of How to Hold a Compound Bow properly.

Step -1 Maintaining Proper Posture

You must therefore stand straight and keep your backs flat while you fire a bow. This keeps you stabler, particularly whenever shooting or bowing from a tree in extreme weather conditions. You can indeed access wider and tougher muscles in the back by holding the back flat. You should loosen your neck and back, your back is low and your shoulder blades are lower.

Hint: sometimes when your shoulders have difficulties calming, just breathe through your belly deeply and exhale when you observe your shoulders fall.   Your mind should be neutral and aim at just the shot on the target directly.

For something like the best stance in the archery, shape a perfectly straight line across your feet to the ceiling (up and down) on your head. This appears to require that your heart stays on your feet and your weight is spread equally on both sides. 

Note: Consider sensing where the weight is spread on your feet to discourage bending down, or rocking forward. Your feet might also measure roughly 60% and your skins should weigh 40%. Make sure even to hold back to the starting position of your shoulder blades also.

Step -2 Knocking an Arrow

Affixing the arrow to the bowstring is considered as  “nocking” the arrow since the section of the arrow that connects to the bowstring is named as the nock. It’s really easy if you follow some simple steps:

Step-3 Take your arrow from your quiver

Line up so that the arrow points up the strange coloured feather or fan and then press the nock on the bow. 

You’re going to snap the nock into a circle in the middle of the bowstring called a “D-loop.” Well, the letter “D” seems and the loop is required later when the release assist is added to the bowstring. Tip: when nocking your arrow, you can still feel (and/or hear) by tapping, which informs the nock of the bow.

The arrow will be put over the arrow rest unless you use a complete resting position which is popular for bowhunting (the whisker biscuit is usually used in examples). Consider placing the arrow on the remaining part of the bowstring before nocking it.

Fun Fact: if you ever see 10 people have been through the arrow-nocking phase, you’ll see 10 combinations to shift the arrow from just the quiver to the nocked position. It’s not the method that’s relevant. The most crucial thing is to lock your arrow on the bowstring by nocking it appropriately each time you expect to fire.

Since you’ve been observing this sequence, you should then be able to easily find your spot, know a strong archery stance, and no arrow. If so, you’re able to take the next step: hooking and squeezing. These two phases are frequently ignored, but they are crucial in deciding where the arrow hits since they are the two places from which the body comes into contact with the bow.

Step-4 Hooking up

With a compound bow, hooking seems to be the act of adding the release assist (hooking it) to the D-loop and afterwards putting your hand upon this release. Depending on the sort of release you use, you may need to lock this into position,

And if you choose to do so on the same day as you hook it up to the D-Loop depends on the type of release assist you to use. There are a lot of release assist options for archers that can be accessed (triggered) in a different manner and carried in slightly different ways in the hand.

A lot of beginners begin with a wrist strap release assist, which buckles or velcros on the hand that unlocks the bowstring, which would also be triggered by softly pressing the trigger with the index finger. 

Other releases are carried in the hand and caused by the use of the thumb or perhaps even the contraction of the muscle. Your nearest archery shop will help you pick the best archery game release support you would like to try.

Hint: No matter what sort of release assist you use, when you put the release in your palm, remain calm. Don’t make a fist all over the release. Instead, hold the back of your hand flat and comfortable with more than enough tension in your fingertips to protect it from slipping out of your hand.

Find a convenient spot since it can stay in almost the same position for the remaining shot as you hold your hands on the shot aid.

Helpful indication: 

Hold your thumb (or index finger) Well from the trigger before you draw the bow entirely and start to aim after firing a trigger-style release. This helps you avoid inadvertently pressing the trigger while you draw an arc.

Step- 5 Gripping

The handle relates to how the arch hand – the hand carrying your bow – is positioned at the arch hand. To stop unpredictable shots going up, low or left and right you can place your grip this very same way all the time. The grip of all aspects of the shot is frequently underrated, but it can change the way your arrows go.

Starting by putting your thumb/ palm meaty segment in the centre of your bow grip (between your lifeline and thumb). This is considered a pressure point that is a big component of the bow’s seizure.

You can have a secure grip with very little tension, just like maintaining your freedom. A relaxed grip will allow your thumb to meet the target, while the knocks of your other fingers create a 45-degree angle to your bow. 

Remember, don’t pick up your bow and keep it with a firm fist; this creates friction and arrows left and right. Hold the pressure point in the centre of the bow handle instead, which allows you to feel better in your shot.

Bottom Line

Follow these tips and tricks to find the right pressure point for putting your hand on your bow: force your hand and feel the place where most touches the ground, lean into the post or pillar and feel some pressure that protects you. When you have your grip right, you can know like you have a strong touch with the bow and that it gives you a good amount of strength while shooting!

Hopefully, this article could remove your confusion regarding How to Hold a Compound Bow.